PCE-PTR 200N

$0.00

PCE-PTR 200N Force gauge for tensile force measurement and pressure force measurement up to 200 N (45 lbs) USB interface and downloadable evaluation software for data transmission / Many measuring adapters

Description

PCE-PTR 200N Force gauge for tensile force measurement and pressure force measurement up to 200 N (45 lbs) USB interface and downloadable evaluation software for data transmission / Many measuring adapters

 

PCE-5000 is a portable hardness tester or durometer that uses the ASTM A1038 ultrasonic contact impedance (UCI) method to measure the hardness of metals and alloys with a minimum thickness of 2 mm / .08 in. Ultrasonic hardness testing is considered nondestructive, as it creates a microscopic indentation only visible when using a high-powered microscope.
Featuring a quick 2-second measurement time, this UCI hardness tester is the ideal tool for weld inspection, hardness control of metal coatings and hardness measurement of fine-grained metals, small forgings, cast materials, heat-affected zones, ion-nitrided stamping dies and molds, forms, presses, thin-walled structures and parts, bearings, tooth flanks, pipes, tanks, steel sheets and products with intricate or complex shapes.
Additional measuring sensors can be connected to the ultrasonic meter, which vary in their test force, which is applied to measure the hardness. The different sensors measure the hardness of the objects depending on the roughness of their surface. For example, the standard sensor with 20 N measures surfaces with a roughness of less than 5 µm. The 10 N sensor measures a roughness of less than 3.2 µm and the one with 98 N measures a roughness of less than 15 µm.

Specification

Measuring range 0 … 200 N / 0 … 45 lbs
Resolution 0.1 N / 0.02 lbs
Pressure calibration 1 Mpa
Load cell Integrated load cell with M6 connection
Measuring range 1 … 100% of the full scale
Measurement accuracy ± 0.5%
Units n, kg, lb
Display LCD
Operating temperatur 10 … 30°C / 50 … 86°F
Relative fencing 15 … 80% relative humidity
Working conditions The device must not be located near sources of vibration or corrosive substances
Weight 1 kg / 2.2 lbs

Delivery Scope

1 x Dynamometer (Penetrometer) PCE-PTR 200N
1 x Penetration tip Ø 6 mm
1 x Penetration tip Ø 8 mm
1 x Penetration tip Ø 11 mm
1 x Flathead adapter
1 x Hook adapter
1 x Ball head adapter
1 x Chisel head adapter
1 x Notch head adapter
1 x Extension rod (65 mm)
1 x USB cable
1 x Power plug
2 x Locking rings
1 x Equipment case
1 x Software
1 x User manual

Reviews

There are no reviews yet.

Be the first to review “PCE-PTR 200N”

Your email address will not be published. Required fields are marked *

TOP