Manometer PCE-DMM 70

$0.00

Description

Digital pressure to 400 bar / Relative and absolute pressure measurement / ± 0.05% accuracy FSO / Storage

The manometer PCE-DMM 70 is a precision instrument for leakage testing. The manometer is specifically designed for leak testing of pipe networks. The actual manometer and the display of this precision instrument can be separated without tools. The measurement values are stored in the internal memory. In addition to the measured values the user can measuring point numbers, etc. This recording interval can be set from one second to 99 seconds. Moreover, the measured value can be stored for a specified time. The measurement and test duration and the number of measured values in the manometer can be programmed. The housing of this leak detector is made of stainless steel. A special feature of this gauge is that the display and sensor are separated from each other. This has the advantage, that several sensors can be installed in the pipe network, but you can see all the values on just one display. Sensor and display are separable with no tools required.

– To 400 Bar
– Relative and absolute pressure measurement
– Memory and interface
– Sensor and display separable
– Backlit LCD Display
– Different units
– Stainless steel diaphragm
– Applications: leak testing in pipe networks, machinery and equipment

Specifications

Nominal relative pressure in Bar 0.1 0.16 0.25 0.40 0.60 1 1.6 2.5 4 6
Nominal absolute pressure in bar 0.40 0.60 1 1.6 2.5 4 6
Overpressure in bar 0.5 1 1 2 5 5 10 10 20 40
Burst pressure in bar 1.5 1.5 1.5 3 7.9 7.5 15 15 25 50
Nominal relative / absolute pressure in bar 10 16 25 40 60 100 160 250 400
Overpressure in bar 40 80 80 108 210 210 600 1050 1050
Burst pressure in bar 50 120 120 210 420 420 1000 1250 1250
Negative pressure -1 … 0 bar; Overload: 5 bar; Burst pressure: 7.5 bar
Vacuum resistance P ≥ 1 bar: unrestricted
General Specifications
Accuracy ≥ 0.4 Bar: ≤ ± 0.05% FSO
< 0.4 Bar: ≤ ± 0.125% FSO
Measuring rate 1/s or 2/s (adjustable)
Long term stability < ± 0.1% FSO
Media Gases
Water
Temperature ranges Fluid: -10 … 55°C / 14 … 131°F
Operating: -10 … 55°C / 14 … 131°F
Storage: -20 … 70°C / -4 … 158°F
Pressure port / housing Stainless steel 1.4404
Seal FKM
Diaphragm Stainless steel 4.4435
Parts exposed to water Pressure port, seals, diaphragm
Display Graphic LCD
Digit height 5.5 mm (gauge)
Reading: max. 7 points, depending on the pressure range
Temperature display, time, 100-segment bar graph,
Adjustable backlighting
Memory Storage of printing units and sensor temperature (min, hrs., Daily for a set time) max. 8,500 values, modes: cyclical, linear measurement interval adjustable
Power supply 3 x 1.5V Duracell Plus Batteries, AA
Battery life 1.5 years standby
Protection IP67
Weight ca. 680 g / 1.5 lbs

Delivery Scope

1 x Digital Manometer PCE-DMM 70 incl. Pressure Transmitter

Reviews

There are no reviews yet.

Be the first to review “Manometer PCE-DMM 70”

Your email address will not be published. Required fields are marked *

TOP