Manometer PCE-DMM 50

$0.00

Description

Manometer to 600 bar/ Relative and absolute pressure measurement / ± 0.25% FSO accuracy

The manometer PCE-DMM 50 is suitable for stationary and mobile pressure measurementThe manometer PCE-DMM 50 is used in mechanical and plant engineering, laboratory technology andenvironmental technologyThis manometer is battery poweredThe measuring range of themanometer reaches up to 600 bar. Besides the presentation of the measured value, the manometer saves the maximum and minimum readingsThe built-in automatic switch-off can be programmed.

– To 600 Bar
– Relative and absolute pressure measurement
– Max-min function with reset
– 2 backlit display
– Different units
– Ceramic membrane

Specifications

Nominal pressure relative inbar 0.4 0.6 1 1.6 2.5 4 6 10 16 25
Nominal pressure absolute inbar 0.6 1 1.6 2.5 4 6 10 16 25
Overpressure in bar 1 2 2 4 4 10 10 20 40 40
Burst pressure in bar 2 4 4 5 5 12 12 25 50 50
Nominal pressure relative / absolute in bar 40 60 100 160 250 400 600
Overpressure in bar 100 100 200 400 400 600 800
Burst pressure in bar 120 120 250 500 500 650 880
Negative pressure -1 … 0 Bar; Overload: 4 Bar; Burst pressure: 7 Bar
Vacuum resistance P > 1 Bar: unrestricted
General Specifications
Accuracy ± 0.25% FSO
Measuring rate 5/s
Long term stability < ± 0.1% FSO
Media Fuels, oils
oxygen
water
Temperature ranges Measuring material: -20 … 85°C / -4 … 185°F
Environment: -20 … 70°C / -4 … 158°F
Storage: -30 … 80°C / -22 … 176°F
Pressure port / housing Stainless steel 1.4404
Seal FKM
Diaphragm Ceramic Al2O3
Parts exposed to water Pressure port, seals, diaphragm
Display LC Display
Power supply 2 x 3.6V Lithium batteries (1/2 AA)
Battery life 5 years standby
Protection IP65
Weight ca. 300 g / < 1 lb

Delivery Scope

1 x Manometer PCE-DMM 50 

Reviews

There are no reviews yet.

Be the first to review “Manometer PCE-DMM 50”

Your email address will not be published. Required fields are marked *

TOP